FrançaisEnglishYou can’t take shortcuts when it comes to your brakes. Here’s a guide to the cost of replacing brake pads and rotors.
If you’re hearing a squeal every time you hit the brakes on your vehicle, it’s probably time to replace your brake pads and rotors. But how much is that going to set you back? This article explains how much a brake pad and rotor replacement costs to give you an idea of what to expect on your bill.
A lot goes into replacing the brake pads and rotors on your car or truck. Apart from the cost of the pads and rotors themselves, there’s the cost of the labour required for the job. Even if you do the replacement yourself, you might need new tools, especially if you have a modern vehicle with an electronic parking brake.
On top of that, you might need more parts. The caliper sliders might need to be serviced, boots and seals could be torn, pistons could be damaged, and brake bleeder screws could be seized in place. If these parts aren’t in good condition, you might have to replace the pads and rotors again in a hurry.
To find out how much brake pads and rotors cost, check out the NAPA Auto Parts website. It has a full page dedicated to brake pads and rotors, which will help you estimate the replacement cost for your vehicle.
The web page lists a range of brake replacement options. It’s a great place to learn about the different grades of brake pads and rotors that NAPA offers. There are pads and rotors aimed at value shoppers, at fleet and emergency service customers, and at owners of high-end vehicles. There are even performance parts for drivers who spend their weekends at the racetrack and need brakes with extra power.
In addition, you can shop for pad sensors, hardware, and any other parts you might need.
The cost of a replacement part is determined by more than just the grade you choose. Bigger vehicles have bigger brakes, and bigger pads and rotors cost more money. Low sales numbers can also increase the cost of parts, which means that having a popular vehicle could lower your expenses.
That covers you for a DIY brake replacement. But what if you don’t want to replace your brakes yourself?
In most cases, it takes one to three hours of labour to replace brake pads and rotors. That’s per axle, not for all four corners at once. The job is easier on some vehicles and will go a little quicker, while on others it’ll take more time and effort.
To find out how long a brake pad and rotor replacement will take on your car or truck, simply contact your local NAPA AUTOPRO service centre. The expert staff and technicians at NAPA AUTOPRO can tell you exactly how long it should take. They can also prepare a complete estimate so that you can see how much it will cost.
What’s more, they can inspect your brakes and let you know whether your car is likely to need more extensive service, such as replacement of the calipers or brake lines due to damage or corrosion. This is important information that will help you plan for the costs in advance.
Author: Jacob 
336
No comments
